Sears 183.91579 manual Problem, Cause, Correction, Wild Beer. continued, Tail-EndBeer

PROBLEM	CAUSE	CORRECTION
Wild Beer. (continued)	• Not enough pressure or no	• Check for defective air vents.
Beer that is either all foam,	pressure at all.	• Always turn the pressure on before drawing beer.
or too much foam and not	• An old keg of beer which has	• If beer has been allowed to stand in warm temper-
enough liquid.	not been stored in cool	atures beyond 45°F for an excessive length of time,
	temperatures has been used.	it may begin a secondary fermentation. Store beer
		at 38˚F-40°F all year round.
Tail-End Beer	• Where air is used as a	• Whenever possible, use CO2 Gas as a pressure
Beer draws well at the	pressure source, air replaces	source.
beginning of the keg.	the CO2 in beer, causing flat
Towards the bottom, it	beer. This problem is not
becomes flat. This is more	evident when beer is being
likely to occur when beer	drawn rapidly.
turnover is slow.

15