11
11
10
91
7
6
128
111
126
11. Tighten the six M8 x 45mm Bolts (104) and
the eight M8 x 16mm Screws (102).
Press the Top Cover (23) into the Right and Left
Frame Covers (21, 22).
102
102
21, 22
104
104
23
94
128
90
10. Apply grease to a Link Arm Axle (94).
Insert the Link Arm Axle (94) into the Right Upper
Body Leg (6) and the Right Link Arm (90) from
the side shown.
Insert a hex key into the M8 x 25mm Screw
(128) in the Link Arm Axle (94).
Using a second hex key, tighten another
M8 x 25mm Screw (128), a Pivot Axle Cover
(111), and an M8 x 25mm x 1.5mm Washer (126)
into the other end of the Link Arm Axle (94).
Tip: Avoid damaging the Pivot Axle Cover
when tightening the Screw.
Repeat this step on the other side of the
elliptical.
Grease