If there are

sheets of plasticContacts on the metal

contacts on the handgrip heart rate monitor, remove the plastic. To mea- sure your heart rate, hold the handgrip heart

rate monitor with your palms resting against the contacts. Avoid moving your hands or gripping the contacts tightly.

When your pulse is detected, a heart symbol will flash in the display each time your heart beats, one or two dashes will appear, and then your heart rate will be shown. For the most accurate heart rate reading, hold the contacts for at least 15 seconds.

If the display does not show your heart rate, make sure that your hands are positioned as described. Be careful not to move your hands excessively or to squeeze the contacts tightly. For optimal perfor- mance, clean the contacts using a soft cloth; never use alcohol, abrasives, or chemicals to clean the contacts.

6. Turn on the fan if desired.

The fan has low and

high speed settings. Press the fan increase

and decrease buttons

repeatedly to select a fan speed or to turn off the fan.

Note: If the pedals do not move for about thirty seconds, the fan will turn off automatically.

7. When you are finished exercising, unplug the power cord.

If the pedals do not move for several seconds, a tone will sound and the console will pause.

If the pedals do not move for several minutes and the buttons are not pressed, the console will turn off and the display will be reset.

When you are finished exercising, press the power switch to the off position and unplug the power cord. IMPORTANT: If you do not do this, the electrical components on the elliptical may wear prematurely.

22

Page 22
Image 22
Sears 23897 user manual Turn on the fan if desired, When you are finished exercising, unplug the power cord