Sears 23897 ASSEMBLY

c To watch an assembly

video, go to

http://productvideo.co/

assembly/sears/nordic-

track or use your mobile

phone or smartphone to

read the QR code at the

right.

c Assembly requires two persons.

c Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until you  nish all assembly steps.

c Left parts are marked gLh or gLefth and right parts

are marked gRh or gRight.h

c To identify small parts, see page 5.

c In addition to the included tool(s), assembly

requires the following tools:

one Phillips screwdriver

one rubber mallet

Assembly may be easier if you have your own set

of wrenches. To avoid damaging parts, do not use

power tools.

ASSEMBLY

1. Orient the Rear Stabilizer (4) as shown.

While a second person lifts the Folding Frame

(2), attach the Rear Stabilizer (4) to the Folding

Frame with two M10 x 120mm Screws (100).

Note: The Folding Frame may be in the folded

position.

Note: If the elliptical is in the folded position,

unfold it after completing this step. To unfold the

elliptical, hold the handle on the Rear Stabilizer

(4), press the Latch Button (67), and lower the

Rear Stabilizer and the Folding Frame (2) to the

floor. 4

100 Handle