HOW TO USE AN ONBOARD WORKOUT
1. Begin pedaling or press any button on the console to turn on the console.
See HOW TO TURN ON THE POWER on page 20.
2.Select an onboard workout.
To select an onboard workout, press the Calorie button or the Performance button repeatedly until the desired workout appears in the display.
When you select an onboard workout, the display will show the duration of the workout and the name of the workout. A profile of the speed settings of the workout will appear in the matrix.
The display will also show the maximum speed (rpm), the maximum resistance level, and the maxi- mum ramp level.
3. Begin pedaling to start the workout.
Each workout is divided into
The resistance level, the ramp incline level, and the target rpm for the first segment will appear in the matrix.
During the |
| |
workout, |
| |
the profiles |
| |
on the |
| |
speed and |
| |
incline tabs | Profile | |
will show | ||
| ||
your prog- |
|
ress. The flashing segment of the profile represents the current segment of the workout. The height of the flashing segment indicates the target speed or the incline level for the current segment.
At the end of each segment of the workout, a series of tones will sound and the next segment of the profile will begin to flash. If a different
resistance level, ramp incline level, and/or target rpm is programmed for the next segment, the resis- tance level, ramp incline level, and/or target rpm will appear in the display for a few seconds to alert you. The resistance of the pedals and the incline level of the ramp will then change.
As you exercise, you will be prompted to keep your pedaling speed near the target rpm for the cur- rent segment. When an
When a
IMPORTANT: The target rpm is intended only to provide motivation. Your actual pedaling speed may be slower than the target rpm. Make sure to pedal at a speed that is comfortable for you.
If the resistance level or incline level for the current segment is too high or too low, you can manually override the setting by pressing the Resistance buttons or the 1 Step Ramp buttons.
IMPORTANT: When the current segment of the workout ends, the pedals will automatically adjust to the resistance level programmed for the next segment and the ramp will automati- cally adjust to the incline level programmed for the next segment.
The workout will continue in this way until the last segment ends. To stop the workout at any time, stop pedaling. The time will flash in the display. To resume the workout, simply resume pedaling.
4.Follow your progress with the display. See step 4 on page 20.
5. Measure your heart rate if desired.
See step 5 on page 21.
6.Turn on the fan if desired. See step 6 on page 22.
7.When you are nished exercising, unplug the power cord.
See step 7 on page 22.
23
