Sears 274.4392839 owner manual VHS or Standard VHS Camcorder, Select 0 UT j acks

Connecting Other Components

S-VHS or Standard VHS Camcorder

(This connection allows you to play back tapes in the camcorder and watch them on the TV.)

Auto

ADAPTOR	AudioNideo	Output Adapter	(_)	(_
	(usually supplied with		_	Back of TV
Connector			_r	_Eu_crotn
	camcorder)	i	{_)L	(_)
Jack
"\		Video Out	Audio..,%

\\

\

\

\

S-VHS Cable

S- VIDEO	....	zi//
Output Jack

An S-VHS or standard camcorder can be connected directly to your TV as shown above. If you have an S-VHS camcorder, connect the S-VHS video cable to the S-VIDEOconnector on

your TV. If you have a standard VHS camcorder, connect the video cable to the VIDEO INPUT 1 jack on the back of your TV. With either video connection, attach the audio cable to the INPUT 1 R/MONO audio jack.

Notes:

•When the S-VHS Cable is connected to the S-VIDEOconnector, the video plug does not have to be connected. However, you may prefer to plug it in anyway to keep it out of the way. The S-VHS video will

automatically override the VIDEO INPUT 1 signal when you select Channel 90.

AudioNideo Cable """	"%%_.._	I I	I ._"-'-,,_,
(usually supplied with camcorder)		_ __T'_)	(_)

•Be sure to connect the video cable, however,if you plan to use the SELECT OUT jacks for recording. When recording from the SELECT OUT jacks, tune to channel 91 to see the signal from the camcorder.

Operation:

•If the camcorder is connected to the VIDEO INPUT 1 jack (instead of the S-VIDEOconnector), select channel 91 on the TV to view whatever the camcorder is playing.

•If the camcorder is connected to the S-VIDEOconnector and INPUT 1 audio jack, select channel 90 on the TV to view whatever the camcorder is playing.

S-VHS or Standard VHS Camcorder

(This connection allows you to record onto the camcorder whatever is currently being displayed on the TV screen.)

Adapter Cable

ADAPTOR

Connector \\

Jack\

AC Outlet

This connection will let you record onto the camcorder whatever is being displayed on the screen such as a TV program. You'll also be able to record signals from a VCR (or similar device) that is connected to the TV's INPUT 1 or 2 jacks.

Note: You will not be able to record TV menus or status displays.

The TV must remain turned on during recording. If you change channels on the TV, the channel change will be recorded on the camcorder tape unless you pause the camcorder during recording.

You may also want to use this connection to dub or edit VCR tapes with two or three camcorders (or VCRs). By connecting one camcorder (or VCR) to the INPUT I jacks and another camcorder (or VCR) to the INPUT 2 jacks, you'll be able to

selectively edit and record whatever is playing on the TV screen onto a third camcorder connected as shown here to the

SELECT 0 UT j acks.

AC Adapter/Charger (usually supplied with camcorder)

Audio

Video

If you connect a surveillance system to your monitor, you'll be able to record what the camera is displaying on the TV screen by connecting a camcorder (or VCR ) to the SELECT OUT jacks as shown here.

To see the signal from a device connected to the INPUT 1 jacks, select channel 91. Select channel 92 to see the signal from a device connected to the INPUT 2 jacks.

Note: Signals from the S-VIDEOconnector do not come thru the SELECT OUT jacks. To record from an S-VHS component, remember to also connect its regular video cable to the VIDEO INPUT 1 jack and then tune the TV to channel 91.

25