Sears 274.4392839 owner manual Special Recording onto VCR, VHS Super VHS VCR

Connecting Other Components

Special Recording onto VCR

(This connection only allows you to record on the VCR whatever is currently being displayed on the TV screen)

This	is not a common application for recording	Back of VCR
with	your VCR, but you may find it useful in
		I	Back of "IV
		Audio	,a-_- otn- _t_er

record onto the VCR whatever is being displayed ( certain situations. This connection will let you [ on the TV screen such as a TV program. You'll

also be able to record signals from another VCR --(or similar device) that is connected to the TV's INPUT 1 or 2 jacks.

The TV must remain turned on during recording. If you change channels on the TV, the channel change will be recorded on the VCR tape unless you pause the VCR during recording.

Because your TV is cable-compatible, this application may be used to record cable-TV programs from the TV onto a VCR that is not cable- compatible.

, C_IIL_ANTENNA

Audio/Video Cables*					_o
Video	_	•	_o	,	s_cT

You may also want to use this connection to dub or edit VCR tapes with two or three VCRs. By connecting one VCR (or camcorder) to the INPUT 1 jacks and another VCR (or camcorder) to the INPUT2 jacks, you'll be able to selectively edit and record whatever is playing on the TV screen on to a third VCR (or camcorder) connected as shown here to the SELECT 0 UT jacks.

If you connect a surveillance system to your monitor, you'll be able to record what the camera is displaying on the TV screen by connecting a VCR (or camcorder) to the SELECT OUT jacks as shown here.

S-VHS (Super VHS) VCR

(This connection allows you to record TV programs and play back tapes.)

Audio/Video Cables*

Incoming

Cable

Back of VCR

Shown here is the preferred method of connecting your S-VHS VCR to your TV.

Connect the S-VIDEO OUT connector on the back of the VCR

to the S-VIDEOconnector on the back of your TV using an S-VHS cable. Remember to connect the audio cables from the

VCR to the INPUT 1 LEFT and R/MONO jacks on the back of the TV. The S-VHS cable carries only video.

Note: Remember to also connect the video cable to INPUT 1 on the back of your TV.

Just remember that you'll be able to record whatever is being displayed on the TV screen. To see the signal from a device connected to the INPUT 1 jacks, select channel 91. Select channel 92 to see the signal from a device connected to the INPUT 2 jacks.

Notes: Signals from the S-VIDEOconnector do not come thru the SELECT OUT jacks. To record from an S-VHS component, remember to also connect the regular video cable to the VIDEO INPUT 1 jack and then tune to channel 91.

You will not be able to record TV menus or status displays.

S-VHS Cable*

CoaxialAntennaCable*

/

When recordingfrom SELECT OUTjacks, tune the TV tochannel 91 to see the signal from the S-VHS VCR.

Operation:

•If the S-VHS VCR is connected as shown above, tune the TV to channel 90 to view whatever the VCR is playing.

•The word S-VIDEOwill appear on the TV when you select Channel 90.

*Optional accessories are available from most dealers or electronics supply stores.

27