Sears 274.4392839 owner manual Labeling Channels, With remote only, Erasing Labels

Operating Features

Labeling Channels

The labeling feature lets you program names (or labels) for the channel numbers. The name you program will then appear on the screen below the channel number whenever the channel number is displayed.

Each name can contain up to four characters, and you' tl be able to assign up to 64 names. After 64 names or labels have been entered, the TV will display this message to

let you know no more channels can be labeled: CHAN LABEL: FULL.

Listed below are the letters and characters from which you'll be able to choose when programming the channel labels:

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

(blank space) ! "# $ % &' ( ) A+,-./0123456789:;

<=>?@

Labeling	Channels	(with remote only)
1. Repeatedly press SETUP to select the			5. Then	press	+ to move	to the next
CHAN LABEL function.			letter	frame.	Pressing	- moves you
			back to the previous letter frame.

.	Press + to enter the		CHAN LABEL
	function.	Four blank		letter frames
	will appear under the			channel	number.	o	Repeat steps 4 and 5 until the name
							is complete. You can now label
							another channel, if desired, by
							selecting the channel number and
							repeating steps 4 and 5.
					7,		When finished, the display will
							automatically disappear	from the
6	Select the channel		number you want				screen in a few seconds.	Your
	to label by pressing		the CHANNEL up				labels will remain in memory until
	or down	button (or by pressing			two		you erase them. They are not
	number	buttons).					affected by power failures.

You must use your remote control to create or erase labels.

oPress and hold the VOLUME up or down button until the letter or

character you want appears on the screen. Pressing VOLUME up sequences through the characters in alphabetical order. Pressing VOLUME down sequences the letters in reverse order.

Erasing Labels

To erase a channel label, first follow steps 1, 2, and 3 above, and then press CLEAR on the remote control.

Note: Autoprogramming new channels

into the channel memory does not affect the channel labels that are already entered.

14