Operating Features
VCR Channel Setup
The VCR 1 CHAN function lets you program to which channel the TV will automatically tune when you press the VCR 1 button on the remote. This is handy if you connect a,VCR to your TV. You will no longer have to remember to which input jacks the VCR is connected because the TV will remember for
yOU.
For example, if you connect a VCR's
AUDIO/VIDEO OUT jacks to the TV's INPUT 1 jacks (as shown on page 25), you will no longer have to remember to select channel 91 on the TV to see what the VCR is playing. By entering channel 91 next to the VCR 1 CHAN function, the TV will automatically tune to channel 91 each time you press the VCR 1 button on the remote.
This function is especially convenient if you have a compatible VCR that can be operated by the VCR 1 button on the remote. Pressing VCR 1 will then not only turn on the VCR but also
Setting Up VCR Channels
1.Repeatedly press SETUP to select the VCR 1 CHAN function.
. Enter the channel number you want to program by pressing two digit buttons on the remote control. (The channel number you enter is the channel to which the TV will tune automatically when you later press the VCR 1 button on the remote.) See the notes
below if you are unsure about which channel number to enter.
3.Press the + button to program the channel number you selected into the TV's memory.
4.If you have another VCR connected to the TV, press SETUP to select the VCR 2 CHAN function.
. Enter the channel number you want to program by pressing two digit buttons on the remote control. (This is the channel number to which the
TV will tune automatically when you later press the VCR 2 button on the
remote.) See the notes below if you are unsure about which channel
number to enter.
6.Press the + button to program the channel number you selected into the VCR 2 CHAN function memory.
automatically tune the TV to the proper channel for viewing the picture from the VCR. You can program most brands of remote- controllable VCRs to respond to the VCR 1 button described on page 29.
The VCR 2 CHAN function works
the same way. It lets you program to which channel the TV will
automatically tune when you press the VCR 2 button on the remote. You
can program most brands of remote- controllable VCRs to respond to the VCR 2 button as described on
page 27. Pressing the VCR 2 button will then not only turn on the VCR but also automatically tune the TV to the proper channel for viewing the picture from the VCR.
| ||
|
| |
Note: Pressing the - button here will turn | Note: Pressing the - button here will | |
off this feature | and display | turn off this feature and display |
VCR 1 CHAN: | OFF again. | VCR 2 CHAN: OFF again. |
Notes about Entering Channel Number:
•Enter channel 91 if your VCR is connected to the TV's audio and video INPUT 1 jacks.
•Enter channel 92 if your VCR is connected to the TV's audio and video INPUT 2 jacks.
•Enter channel 90 if you have a
•Enter channel 03 (or 04) if you did not use any audio/video cables and connected the VCR to the TV's round antenna jack labeled CABLIWANTENNA. Enter the same channel number (03 or 04) as the position of the VCR's CH3/CH4 switch. This is the channel to which you must tune your TV for viewing signals from your VCR.
•Refer to pages
17
