Sears 274.4392839 owner manual Setup Button

Operating Features

SETUP Button

Repeatedly press the SETUP button to select (highlight) the function you want to adjust, then press + or - to change or set it. Pressing the RES/MEM button lets you move back up the screen (one item per press).

The setup menu will automatically disappear from the screen if you do not press + or - within a few seconds. Whenever a menu or

display disappears from the screen, the + and - buttons on the front of the TV become

the volume adjustment buttons.

Via remote control, your TV will "remember" which function you displayed last-even after the menu has disappeared from the screen. So, if you want to adjust the same function again, simply press the + or - button on the remote control. The

last function you adjusted will appear on the TV screen.

The CAPTIONING feature lets you display as text on the screen the audio

._ portion of certain programs encoded with the Closed Captioning (CC)

_!'_ information. Four types of closed captioning are available. Select Captions 1

:i for full translation of the primary language in your area. Captions 2 is used for an alternate service, such as secondary language translation or simplified

_ English. Two Text modes are also supported.

By setting the SLEEP TIMER, you can program your TV to turn itself off after a certain period of time. This is useful whenever you want to watch TV for an hour or so before going to sleep. Press the + or - button to select the length of time you want the TV to stay on.

You can program your TV to turn on and/or off at the times you choose by setting the ALARM function.

CHAN LABEL lets you program names (or labels) for the channel numbers. The names you select will then appear on the screen whenever the channel number is displayed.

The PARENTAL CONTROL feature lets you lock out any channels that you don't want your children to watch. Pressing + or - switches this function from OFF to ON. When this function is set to ON, channels that have been locked out with the CHAN CTRL function cannot be viewed. When this function is set to OFF, all channels can be viewed.

The CHAN CTRL (Channel Control) function works hand-in-hand with the PARENTAL CONTROL function. It lets you select the channels you want to lock out. First select the channel number you want to lock out and then press + to change this function from NORMAL to LOCKED. When the PARENTAL CONTROL function is set to ON, the channels you locked with this function cannot be viewed.

When you press + or - to start the AUTOPROGRAM function, the TV will automatically cycle through all channels and place the active channels for your area in its channel memory. Pressing the CHANNEL up or down buttons will then allow you to scan only active channels.

The CHAN MEM function allows you to erase and add channels to channel memory as desired.

The CABLE/AIR function tells your TV whether you have a cable-TV system or a home antenna connected to the TV. Your TV is so automatic that you will probably never need to change this function. When your TV autoprograms, it automatically adjusts the CABLE/AIR setting for you. If you should ever need to override the automatic setting, press + or - to change it.

The VCR 1 CHAN function lets you program to which channel the TV will automatically tune when you press the VCR I button on the remote.

The VCR 2 CHAN function lets you program to which channel the TV will automatically tune when you press the VCR 2 button on the remote.

The CABLE CHAN function lets you program to which channel the TV will automatically tune when you press the CABLE button on the remote.

After you set the clock, you will be able to see the on-screen time display whenever you change channels or press the DISPLAY or TV button on the remote control. To set the clock when this function is selected, first press and hold - to set the correct hour (including AM and PM). Then press and hold + to set the correct minutes,

10