User Manual Chapter 1 Introduction 3
Frequent Tasks

Setting Up the System — Summary

For details, see “Setting Up the System” on page27.
1. Open case’s lids and front door.
2. Verify safe powering and grounding.
Inspect ground prong on power cord.
3. Connect to AC power, or attach battery.
4. Turn on power switch.
5. Remove insertion tube from storage reel.
6. Unwrap handset cable, and remove handset from case.
7. Install optical tip, accessories, and peripheral devices.

Capturing Images — Summary

For details, see “Capturing Images and Videos” on page45.
1. Steer probe until desired view is displayed.
Position camera by moving joystick toward desired feature.
2. Freeze the image.
When desired image is displayed, press .
3. Save the image.
Press . Select Return. The image is saved.

Recording Video — Summary

For details, see “Working With Videos” on page63.
1. Start recording video.
Press . Select Start Recording.
2. Stop recording video.
Press . Select Video Record > Stop Recording.

Putting the System Away — Summary

For details, see “Putting the System Away” on page32.
1. Straighten bending neck.
2. Turn off system, and disconnect from power source.
3. Detach peripheral devices and accessories.
4. Return insertion tube to storage reel, and wrap handset cable.
5. Store system and components in case.