A-4 Dip Switch Setting
Changing the DIP switch settings
If you need to change settings, follow the steps be low to make your
changes:
CAUTION:

Turn off the printer while removing the DI P switch cover to

prevent an electric short, which can dam age the printer.

1. Make sure the printer is turned off.
2. Remove the screw from the DIP switch cover. Th e n take off the
DIP switch cover, as shown in the illustration below.
3. Set the switches using a pointed tool, such as tweezers or a
small screwdriver.
4. Replace the DIP switch cover. Then secure it with the screw.
The new settings take effect when you turn on the printer.
DSW1 DSW2