Sennheiser 500 Series SK 500 bodypack transmitter

Putting the devices into operation

SK 500 bodypack transmitter

Inserting the batteries/accupack

For powering the bodypack transmitter, you can either use two 1.5 V AA size batteries or the rechargeable Sennheiser BA 2015 accupack.

Push the two catches in the direction of the arrows and open the battery compartment cover .



Insert the two batteries or the accupack as shown above. Observe correct polarity when inserting the batteries/accupack.

Close the battery compartment.

The battery compartment cover  locks into place with an audible click.

Charging the accupack

To charge the BA 2015 accupack:

Insert the bodypack transmitter into the L 2015 charger (optional accessory).

The L 2015 charger can only charge the combination BA 2015 accupack/bodypack transmitter. Standard batteries (primary cells) or individual rechargeable battery cells cannot be charged.

Connecting the microphone cable/instrument cable

The audio input is designed for the connection of both condenser microphones and instruments (e.g. guitars). DC powering of the condenser microphones is via the audio input.

Use one of the recommended Sennheiser microphones or the optional CI 1 instrument cable.

 Connect the 3.5 mm jack plug  from the Sennheiser microphone or instrument cable to the 3.5 mm jack socket MIC/LINE .

		Lock the 3.5 mm jack plug by screwing down the coupling ring  of the cable.
		Via the operating menu, adjust the sensitivity of the microphone/line input.



14