Sennheiser 500 Series manual 30

Overview of the operating menus

Display	Function of the menu item
TX-Mute	• Transmitter is muted or
	• no pilot tone
RX-Mute	Receiver is muted
Low Battery	Charge status of the transmitter battery/the BA 2015 accupack is critical
Exit	Exits the submenu “Warnings” and returns to the extended menu “Advanced Menu”

SK 500 and SKM 500

Main menu “Menu”

	Sensitivity	Extended menu
	Frequency Preset
		“Advanced”
	Name
	Auto Lock	Tune
		Mute Mode (SK)
	Advanced
	Exit	RF Power
		CableEmulation (SK)
		Pilot Tone
		LCD Contrast
		Reset
		Software Revision
		Exit
Display	Meaning
Main menu “Menu”
Sensitivity	Adjusts the sensitivity “AF”
Frequency Preset*	Changes the frequency bank and the channel
Name*	Enters a freely selectable name
Auto Lock	Activates/deactivates the automatic lock mode
Advanced	Calls up the extended menu “Advanced Menu”
Exit	Exits the operating menu and returns to the current standard display
Extended menu “Advanced Menu”
Tune	Sets the transmission frequencies for the frequency banks “U1” to “U6”
	Special function: Sets a channel and a transmission frequency for the frequency banks
	“U1” to “U6”:
	 Select this menu item and call it up by pressing the SET button (SK)/the multi-function
	switch (SKM) until the channel selection appears.
Mute Mode (SK)	Sets the mode for the MUTE switch
RF Power	Adjusts the transmission power
Cable Emulation (SK)	Emulates guitar cable lengths/guitar cable capacities
Pilot Tone*	Activates/deactivates the pilot tone transmission
LCD Contrast	Adjusts the contrast of the display panel
Reset	Resets the bodypack transmitter/radio microphone
Software Revision	Displays the current software revision
Exit	Exits the extended menu “Advanced Menu” and returns to the main menu

*For information on the sychronization of transmitters with receivers, refer to page 21.

28