Sennheiser 500 Series Selecting a standard display, SKM500

Using the devices

Selecting a standard display

EM 500

 Press the jog dial to select a standard display:

Contents of the display										Selectable standard display
40			PEAK	B.CH: 20.24			ew500 G3			“Receiver Parameters”
			0	543.200					MHz	appears after switch-on of the receiver and displays the
30			-10
20			-20							receiver parameters (see page 5).
10			-30	EQ:			SKM500
			-40	P + 12dB MUTE
	RF		AF
40			PEAK0	543.200 MHz			ew500 G3			“Transmitter Parameters” (transmitter type/microphone)
										displays the microphone head (SKM only) and the transmitter
30			-10	SKM500
20			-20						935	type.
10			-30		Standard
			-40
	RF		AF	P	– 12dB	MUTE
					PEAK					“Soundcheck” (display with additional function)
	40			0		Soundcheck				displays the signal quality within the transmission area.
	30			-10
						20.24		ew500 G3
	20			-20
	10				--4030	543.200MHz
		RF			AF	P MUTE
40			PEAK0	543.200 MHz			ew500 G3			“Guitar Tuner” (display with additional function)
30		-10								displays the guitar tuner*.
20		-20						MUTE
								440 Hz
10		-30
		-40
	RF		AF

*The “Guitar Tuner” standard display is deactivated upon delivery. To show this standard display, you have to activate it (see page 27).

Information on the soundcheck function and the guitar tuner function can be found in the instruction manual of the EM 500 receiver available on the ew G3 product page at www.sennheiser.com.

SK 500 and SKM 500

To select a standard display:

SK 500	SKM 500
 Press the rocker button.	 Move the multi-function
	switch.

You can select the following standard displays: “Frequency/Name”, “Channel/Frequency”, “Channel/Name”.

25