Using the devices

Do not touch the contacts of the radio microphone nor the contacts of the microphone head. The contacts can become dirty or damaged if touched.

When unscrewing the microphone head during operation, the muting function is automatically activated. “MUTE” appears on the display panel.

When screwing the microphone head back to the radio microphone, the muting function is deactivated.

Screw the desired microphone head to the radio microphone.

Put the radio microphone back into operation.

Changing the color-coded protection ring

The color-coded protection ring prevents the multi-function switch from accidental operation. Protection rings in different colors are available as accessories. The protection rings allow you to clearly identify each radio microphone.

Remove the color-coded protection ring as shown in the left-hand diagram.

Put on a new protection ring as shown in the right-hand diagram.

Using the devices

To establish a transmission link, proceed as follows:

1.Switch the receiver on.

2.Switch a transmitter on.

The transmission link is established and the display backlighting of the receiver changes from red to orange.

17