Using the devices
SK 500 bodypack transmitter
To switch the bodypack transmitter on (online operation):
Push the two catches and open the battery compartment cover .
ON/OFF Briefly press the ON/OFF button .
The bodypack transmitter transmits an RF signal. The transmission icon is displayed.
The red ON LED lights up and the standard display “Frequency/Name” appears on the display panel.
You can switch the bodypack transmitter on and deactivate the RF signal on switch- on. For more information, see below.
To switch the bodypack transmitter off:
If necessary, deactivate the lock mode (see page 22).
ON/OFF Press the ON/OFF button until “OFF” appears on the display panel. The red ON LED goes off and the display panel turns off.
When in the operating menu, pressing the ON/OFF button will cancel your entry (ESC function) and return you to the current standard display.
To switch the bodypack transmitter on and to deactivate the RF signal on
SET | Press the ON/OFF button until “RF Mute On?” appears on the display panel. | ||||||||||
SET | Press the SET button . |
| |||||||||
| The transmission frequency is displayed but the bodypack transmitter does not | ||||||||||
| transmit an RF signal. The transmission icon is not displayed. When the pilot | ||||||||||
| tone function is activated on both bodypack transmitter and receiver, “RF Mute” | ||||||||||
| appears on the receiver’s display panel. | ||||||||||
|
|
|
| 543.200MHz |
| ||||||
|
|
|
| ew500 G3 |
| ||||||
|
|
|
|
| |||||||
|
|
|
| P |
| MUTE |
|
|
|
|
|
|
| AF |
|
|
|
|
|
|
| ||
|
|
|
| ||||||||
19