Sennheiser 500 Series Muting the audio signal or deactivating the RF signal, ew500 G3, 543.200MHz, AF P MUTE

Using the devices

Muting the audio signal or deactivating the RF signal

EM 500

To mute the audio signal:

When one of the standard displays is shown on the display panel, press the STANDBY button.

“RX Mute On?” appears on the display panel.

 Press the jog dial.

The audio signal is muted. “RX Mute” appears in alternation with the current standard display.

To unmute the audio signal:

Press the STANDBY button.

“RX Mute Off?” appears on the display panel.

 Press the jog dial.

The muting is canceled.

SK 500



	543.200MHz
	ew500 G3
	AF P MUTE
	

The MUTE switch allows you to mute the audio signal or to deactivate the RF signal. Via the “Mute Mode” menu item, you can set the desired function of the MUTE switch :

Setting	Slide the MUTE switch  ...	Function
“Disabled”	... to the left (position MUTE)	None
“RF On/Off”	... to the left (position MUTE)	Deactivates the RF signal
		(offline operation)
	... to the right	Activates the RF signal
		(online operation)
“AF On/Off”	... to the left (position MUTE)	Mutes the audio signal
	... to the right	Unmutes the audio signal

From the “Mute Mode” menu item, select the desired setting (see page 28).

Exit the operating menu.

Slide the MUTE switch  to the left, to the position MUTE. The bodypack transmitter reacts as indicated in the table.

The current state of the muting function or the RF signal is displayed on the display panel of the bodypack transmitter. An additional display appears on the receiver’s display panel when the pilot tone function is activated on both bodypack transmitter and receiver and, in addi- tion, this display has been activated via the “Warnings” menu item on the receiver (see page 27).

23