Sennheiser 500 Series Overview of the displays of the EM 500 receiver, 543.200MHz, EQ:, + 12dB MUTE

Product overview

Overview of the displays of the EM 500 receiver

After switch-on, the receiver displays the standard display “Receiver Parameters”. For further illustrations and examples of the different standard displays, please refer to page 25.

This standard display displays the operating states of the receiver and provides the most important information on the received transmitter – provided the linked transmitter supports this function.

  ￿  

		PEAK0			B.CH: 20.32					ew500 G3
40
20		-20					543.200MHz
30		-10
10		-30			EQ:					SKM500
		-40				+ 12dB MUTE
					P
	RF	AF
		  								 
Display			Meaning
 RF level “RF”								Diversity display:
(Radio Frequency)									Antenna input I is active
					40				Antenna input II is active
				30
								RF signal level:
				20
				10				Field strength of the transmitted signal
								Squelch threshold level
					RF
 Audio level “AF”				PEAK				Modulation of the transmitter
(Audio Frequency)								with peak hold function.
				0
			-10					When the level display for audio level shows full
				-20				deflection, the audio input level is excessively
				-30				high. When the transmitter is overmodulated
			-40					frequently or for extended periods of time, the
				AF				“PEAK” display is shown inverted.
 Frequency bank and			Current frequency bank and channel number
channel
 Frequency			Current receiving frequency
 Name			Freely selectable name of the receiver
 Pilot tone “P”			Activated pilot tone evaluation
 Equalizer setting			Current equalizer setting
 Output gain			Current output gain
 Muting function “MUTE” Receiver is muted
			Receiver does not output an audio signal
			(see also page 30).
 Transmitter type			Product name of the linked ew G3 transmitter
			The product name is displayed only if the linked trans-
			mitter supports this function.

6