Sennheiser 500 Series 22

Briefly press the ON/OFF button .

The radio microphone transmits an RF signal. The transmission icon is displayed.

The red ON LED lights up and the standard display “Frequency/Name” appears on the display panel.

Using the devices

Use this function to save battery power or to prepare a bodypack transmitter for use during live operation without causing interference to existing transmission links.

To activate the RF signal:

SET		Briefly press the ON/OFF button .
		“RF Mute Off” appears on the display panel.
SET		Press the SET button .
		The transmission icon is displayed again.

SKM 500 radio microphone

To switch the radio microphone on (online operation):

ON/OFF

You can switch the radio microphone on and deactivate the RF signal on switch-on.

For more information, see below.

To switch the radio microphone off:

If necessary, deactivate the lock mode (see page 22).

ON/OFF Press the ON/OFF button until “OFF” appears on the display panel. The red ON LED goes off and the display panel turns off.

When in the operating menu, pressing the ON/OFF button will cancel your entry (ESC function) and return you to the current standard display.

To switch the radio microphone on and to deactivate the RF signal on switch-on (offline oper- ation):

SET	Press the ON/OFF button until “RF Mute On?” appears on the display panel.