| Overview of the operating menus | ||
|
|
|
|
|
| ||
Display | Function of the menu item |
| |
Easy Setup | Scans for unused frequency presets, releases and selects frequency presets |
| |
Frequency Preset | Changes the frequency bank and the channel |
| |
Name | Enters a freely selectable name |
|
|
| |||
AF Out | Adjusts the audio output level |
|
|
| Adjustment range: |
|
|
|
| ||
| Special function “gain reserve”: |
| |
| When you have adjusted a level of +18 dB, turn the jog dial to the right and keep it |
| |
| in this position until the next higher value appears. |
| |
Equalizer | Changes the frequency response of the output signal |
| |
Auto Lock | Activates/deactivates the automatic lock mode |
| |
Advanced | Calls up the extended menu “Advanced Menu” |
| |
Exit | Exits the operating menu and returns to the current standard display |
| |
“Easy Setup” |
|
|
|
|
| ||
Reset List | Releases all locked frequency presets and selects an unused frequency preset |
| |
Current List | Selects an unused frequency preset |
| |
Scan New List | Scans for unused receiving frequencies (frequency preset scan) |
| |
Exit | Exits the submenu “Easy Setup” and returns to the main menu |
| |
Extended menu “Advanced Menu” |
| ||
|
| ||
Tune | Sets the receiving frequencies for the frequency banks “U1” to “U6” |
| |
| Special function: Sets a channel and a receiving frequency for the frequency banks “U1” to |
| |
| “U6”: |
| |
| Select this menu item and call it up by pressing the jog dial until the channel |
| |
| selection appears. |
| |
Sync Settings | Activates/deactivates the parameters to be transferred to the transmitters |
| |
Guitar Tuner | Selects the mode of the guitar tuner function |
| |
Pilot Tone | Activates/deactivates the pilot tone evaluation |
| |
Warnings | Activates/deactivates the warning messages |
| |
LCD Contrast | Adjusts the contrast of the display panel |
| |
Reset | Resets the receiver |
| |
Adjusts the IP address of the receiver |
| ||
Software Revision | Displays the current software revision |
| |
Exit | Exits the extended menu “Advanced Menu” and returns to the main menu |
| |
Submenu “Sync Settings” |
| ||
|
| ||
SKM Settings | Activates/deactivates the parameters to be transferred to the SKM radio microphones |
| |
SK Settings | Activates/deactivates the parameters to be transferred to the SK bodypack transmitters |
| |
Exit | Exits the submenu “Sync Settings” and returns to the extended menu “Advanced Menu” |
| |
|
|
|
|
“SK Settings”/“SKM Settings”
Here you can activate/deactivate the transfer of the following transmitter parameters: Sensitivity, Auto Lock, Mute Mode (SK), RF Power and Cable Emulation (SK) (see page 28)
“Warnings”
| Activates/deactivates warnings (color change and warning messages): |
Audio overmodulation | |
Low | RF signal is weak |
RF signal is too weak or no RF signal | |
|
|
27