Sennheiser EM 3732, EM 3731, EM 3732 Command Indications and displays

Indications and displays

							Indications and displays
							The displays provide information on the operating states of the
							corresponding receiver and those of the received transmitter.
							Reception display
							The reception display is permanently displayed. If you do not press a
							button on the transmitter, the display will dim after 60 seconds
							(see page 8).
							RF level display “RF” for the antennas
	￿				￿		The left bargraph ￿ shows the strength of the received RF signal for
							antenna A; the right bargraph ￿ shows the strength of the received RF
		A	RF	B		% DEV
							signal for antenna B.
			300			PEAK
			100			100
			30			50
			10
			∝V			10	When the RF signal of the received transmitter is too weak on both
Mute							antennas:
							y the text “Mute” flashes in alternation with the status display,
							y the warning triangle for indicating error states 5 lights up red,
							y the receiver is automatically muted to suppress hissing noise.
							Display of the squelch threshold
							The top edge of the rastered area ￿ shows the adjusted squelch
			RF			% DEV
		A		B
							threshold. The squelch threshold can be adjusted in the “Squelch” menu
			300			PEAK
			100			100	(see “Adjusting the squelch threshold” on page 30).
			30			50	If the squelch threshold is not reached for 20 minutes, the display dims.
			10
							(see page 8).
			∝V			10
			￿
							Diversity display
			￿				The receivers operate on the true diversity principle (see “Diversity
							reception” on page 39). The diversity display ￿ indicates whether
							diversity section A (i.e. antenna A) or diversity section B (i.e. antenna B) is
		A	RF	B		% DEV
							active. The letter of the active diversity section appears backlit.
			300			PEAK
			100			100
			30			50
			10
			∝V			10

9