The operating menu
Freq. occupied B.Ch
790.800 MHz 1.
Scan new
Channel list
Scan new
Scan reset
DEV | M | save digital audi |
| 790.800 z | processing |
| H | |
| 03.03CH | sync |
| BANK AF COM esc |
|
|
| sync |
| Freq. occupied | B.Ch |
790.800 MHz 1.
Note:
After the scan, the channels that are occupied or subject to interference are marked with a warning triangle and the text “Freq. occupied” in the “Tune” menu.
Starting the scan
Via the “Scan new” menu, you can scan all frequency banks for free channels. The last scan result is overwritten.
Before starting the scan, switch all transmitters of your system off, since channels used by
Turn the jog dial 7 until the arrow points to “Scan new”.
Press the jog dial 7to start the scan.
The receiver scans the frequency banks one after the other for free channels. This can take several minutes. After the scan, a table displays
the number of free channels for each frequency bank and the green backlighting of the save button 8flashes.
Note:
You can cancel the scan at any time by pressing the esc button 6. The display changes to the setting mode of the “Scan” menu and the last scan result is restored.
Turn the jog dial 7to select a frequency bank with a sufficient number of free channels.
Press the save button 8.
The selected frequency bank is automatically called up in the “B.Ch” menu.
Select a channel from this frequency bank (see “Selecting a frequency bank and a channel” on page 28).
Note:
After the scan, the channels that are occupied or subject to interference are marked with a warning triangle and the text “Freq. occupied” in the “Tune” menu.
34