EV

M

save digital audio

 

790.800 z

processing

 

H

 

03.03CH

sync

 

esc

 

BANK AF COM

sync

Using the receiver

Synchronizing the transmitter with the receiver frequency

Via its infra-red interface, the receiver can transfer the frequency and the name to suitable transmitters (e.g. SK 5212, SKM 5200 or SKP 3000).

Note:

The transmitter must be from the same frequency range (“A” to “I”, see page 5) and be equipped with the same compander system (HDP, see page 38) as the receiver!

￿Set the receiver to the desired receiving frequency (see “Setting the receiving frequency” on page 28 and “Selecting a frequency bank and a channel” on page 28) and enter the desired name (see “Entering a name” on page 29).

￿Press the sync button 9.

The two blue LEDs in the infra-red interface (sync) A flash and the backlighting of the sync button 9flashes red. The receiver is ready for synchronization.

￿Position the transmitter’s infra-red interface at a max. distance of 5 cm in front of the infra-red interface (sync) A.

The transfer starts automatically. During the transfer, the two blue

save digital audio

A RF B

 

LEDs in the infra-red interface (sync) A flash and the backlighting of

 

the sync button 9flashes green.

processing

 

300

PEA

sync

100

1

30

 

 

esc

 

– After successful completion of the synchronization, the two blue

∝V

 

sync

 

 

10

 

 

 

 

 

LEDs in the infra-red interface (sync) A stop flashing and

 

 

 

the sync button 9 is backlit in green. The receiver’s frequency and

 

 

 

name are now also set on the transmitter and the transmission link

 

 

 

is ready for operation.

<5cm

–If an error occurred during synchronization (e.g. the transmitter is

too far away from the receiver), the two blue LEDs in the infra-red interface (sync) Astop flashing and the sync button 9is backlit in

red.

Note on the SKM 5200 hand-held transmitter:

SKM 5200

The infra-red interface of the SKM 5200 hand-held transmitter is located at the left-hand margin of the display. Position the transmitter’s infra-red interface precisely in front of the infra-red interface (sync) Aof the receiver.

21