Tune

B.Ch 790.

U.01 800

MHz

776 866

UHFMHz

B.Ch

790.800MHz 1.

Name

DEV

M

save digital audi

 

790.800 z

processing

 

H

 

03.03CH

sync

 

esc

 

BANK AF COM

sync

The operating menu

The selected frequency bank and the selected channel are set. The display changes to the selection mode of the operating menu.

Changing the receiving frequency for a selected channel in the frequency bank “U”

Each receiver has seven frequency banks. The frequency banks “1” to “6” have up to 60 channels that are factory-preset to a receiving frequency (see enclosed frequency tables). The frequency bank “U” (user bank) has 60 channels to store your selection of receiving frequencies that can be freely selected in 5-kHz increments within the switching bandwidth. Via the “Tune” menu, you can freely select the frequencies to be stored in the frequency bank “U”.

￿Change to the setting mode of the “B.Ch” menu and select the frequency bank “U” and one of the channels “01” to “60” whose frequency you want to change and store (see “Selecting a frequency bank and a channel” on page 28).

Note:

The receiving frequencies of the channels in the frequency banks “1” to “6” cannot be changed. When you have selected one of the frequency banks “1” to “6” and then select the “Tune” menu, the receiver automatically switches to channel “01” of the frequency bank “U”.

￿Change to the setting mode of the “Tune” menu and select the receiving frequency you want to store (see “Setting the receiving frequency” on page 28).

The selected receiving frequency is set and stored on the selected channel of the frequency bank “U”, i.e. the previously stored frequency is overwritten. The display changes to the selection mode of the operating menu.

Entering a name

Via the “Name” menu, you can enter a freely selectable name for the receiver. The name can be displayed on the status display and can consist of up to six characters such as:

yletters (without pronounciation marks),

ynumber from 0 to 9,

yspecial characters and spaces.

￿Change to the setting mode of the “Name” + , - / 0 1 2 3 4 5 6

menu.

7 8

9

* ; < = > A A B

EL

 

E

The first character of the name starts C D

F G H I J K L M N

 

flashing.

 

OPQRSTUVWXYZ

 

 

 

 

 

￿Select a different character by turning the jog dial 7. The selected character starts flashing.

￿Confirm the selected character by pressing the jog dial 7.

The first character is accepted and stops flashing. The next character starts flashing.

￿Repeat the last two steps to enter the remaining characters.

￿After you have entered the six characters of the name, press the save button 8.

The name is stored. The display changes to the selection mode of the operating menu.

In order that the name is displayed on the status display, you may have to change the contents of status display (see “Selecting the status display” on page 36).

29