Low Batt

AF COM

AF

COM

Indications and displays

Transmitter battery status display

The 6-step transmitter battery status display ￿ provides information on the transmitter’s remaining battery/accupack capacity:

Number of segments

Capacity

Accupack

Battery

 

 

 

 

 

approx. 100 %

full

 

 

 

 

approx. 80 %

-

 

 

 

 

approx. 60 %

half-full

 

 

 

 

approx. 40 %

-

 

 

 

 

approx. 20 %

-

 

 

 

(Low Batt)

approx. 0 %

almost empty

 

 

 

 

Note:

If no battery/accupack status signal is received, the battery status display is not shown.

When the battery/accupack is almost empty, text “Low Batt” flashes in alternation with the status display. In addition, the warning triangle for indicating error states 5lights up red.

Command display (status display of the audio outputs AF and COM)

The command display is only available with the EM 3732 Command twin receiver.

Besides the two audio outputs K and M, the EM 3732 Command twin receiver also features two command outputs Jand L.

Via the “Command” menu, you can configure the receiver so that – with the command button of the transmitter pressed – the audio signal is available at only one of the outputs or at both (see “Configuring the audio outputs of the EM 3732 Command twin receiver” on page 32).

The command display ￿ shows the audio output at which the trans- mitter’s audio signal is available.

When “AF” lights up brightly, the audio signal is available at the audio output Kor M.

If the “AF” symbol does not appear, the audio signal is not issued on the audio output Kor M.

When “COM” lights up brightly, the audio signal is available at the command output J or L.

If the “COM” symbol does not appear, the audio signal is not issued on the command output J or L.

11