Scan reset
Channel list
Scan new
Scan reset
Bank 1 2 3
Free 43 40 42
Bank 4 5 6 U
Free 32 31 33 60
DEV | M | save digital audi |
| 790.800 z | processing |
| H | |
| 03.03CH | sync |
| esc | |
| BANK AF COM |
sync
The operating menu
Releasing channels that are used or subject to interference
After the scan, the channels that are occupied or subject to interference are marked with a warning triangle and the text “Freq. occupied” in the “Tune” menu. Via the “Scan reset” menu, you can unmark these channels. The last scan result is deleted.
Turn the jog dial 7 until the arrow points to “Scan reset”.
Press the jog dial 7.
The number of free channels is reset to the maximum for all frequency banks.
Turn the jog dial 7 to select a frequency bank.
Press the save button 8.
The selected frequency bank is automatically called up in the “B.Ch” menu.
Combined with Sennheiser 3000 and 5000 series transmitters, the receivers can form transmission links that are suitable for
CAUTION! Risk of reception interference!
If – within the receiver’s frequency range – transmitters transmit on channels from different frequency banks, reception can be subject to interference and
Set all transmitters of a
Before putting the transmission links into operation, we recommend that you perform a scan in order to find a frequency bank with a sufficient number of free channels:
Switch all transmitters off.
Use a receiver to scan all frequency banks for free channels (see “Scanning the frequency banks for
Select a frequency bank with a sufficient number of free channels (see “Selecting a frequency bank and a channel” on page 28).
Set each transmitter/receiver pair in your
35