Sennheiser SDC 8200 SYS-M software manual Reactivating the last active console

Monitoring and controlling a conference

Reactivating the last active console

This function is e.g. for the quick reactivation of the console of a delegate whose speaking time is over.

To reactivate the last active console:

￿Click the “Mic On” button on the control palette. The last deactivated console is reactivated.

Using the “Single Delegate” option button in the “Speech Timer” box

The green bar shows the countdown of the speaking time. You can control this speaking time as follows:

To temporarily interrupt the countdown:

￿Click the “HOLD” button.

The speaker can continue to speak while the countdown is temporarily interrupted.

To continue the countdown:

￿Click the “Proceed” button.

To stop the countdown:

￿Click the “STOP” button.

The countdown stops and the “speaking right” is withdrawn from the speaker.

Using the “Global” option button in the “Speech Timer” box

To change the preset maximum speaking time:

￿Click one of the arrows in the “Max. speaking time” box in the lower part of the control palette.

You can set speaking times of between 1 and 200 minutes.

To start the countdown:

￿Click the “START SPEECHTIME” button.

The countdown starts. The green bar shows the countdown of the speaking time. The clock is displayed and shows the countdown in seconds.

To temporarily interrupt the countdown:

￿Click the “HOLD” button.

The countdown is interrupted.

To continue the countdown:

￿Click the “CONTINUE” button. The countdown continues.

To stop the countdown:

￿Click the “STOP SPEECHTIME” button.

The countdown stops. The clock and the “Max. speaking time” box are no longer displayed.

The system is now ready to start a new countdown.

69