Using the transmitter

￿ Press the jog dial.

 

The transmission icon

is displayed again.

To switch the transmitter to standby mode:

￿If necessary, deactivate the lock mode (see page 14)

￿Keep the STANDBY button  pressed until “OFF” appears on the display panel. The transmitter switches to standby mode.

When in the operating menu, pressing the STANDBY button  will cancel your entry (ESC function) and return you to the standard display.

The STANDBY button  is backlit in red both during operation and in standby mode.

To completely switch the transmitter off:

￿Disconnect the transmitter from the mains by unplugging the mains plug from the wall socket.

The backlighting of the STANDBY button  goes off.

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via the “Auto Lock” menu item (see page 25). If the lock mode is activated, you have to temporarily deactivate it In order to be able to operate the transmitter:

￿ Press the jog dial.

“Locked” appears on the display panel.

￿ Turn the jog dial.

“Unlock?” appears on the display panel.

￿ Press the jog dial.

The lock mode is temporarily deactivated.

–When you are in the operating menu, the lock mode remains deactivated until you exit the operating menu.

–When the standard display is shown, the lock mode is automatically activated after 10 seconds.

The lock mode icon % flashes prior to the lock mode being activated again.

PEAK PEAK

00 -10 -10-20-20-30-30

-40 -40

AF I AF II

B.Ch: 5.14

**2000**

552.300MHz

EQ

Standard -18dB %

Activating/deactivating the RF signal

To deactivate the RF signal:

￿When the standard display is shown on the display panel, press the STANDBY button.

“RF Mute On?” appears on the display panel.

14