Sennheiser SR 2000 IEM, SR 2050 IEM 24

Adjusting settings via the operating menu

Adjusting settings via the operating

The main menu “Menu”

Adjusting the input sensitivity – “Sensitivity”

Sensitivity

PEAK

Sensitivity

PEAK

Sensitivity

Mode

-10

Exit

-10

Easy Setup

-20

Sensitivity

-20

– 18

-20

– 15

-30

Mode

-30

Frequency Preset

-40

– 18dB

Name

Call up “Sensitivity”

Select the desired

Store the setting

Equalizer

Auto Lock	setting

Advanced


Exit	“Stored”

Adjustment range: 0 to –48 dB, adjustable in steps of 3 dB

Via the “Sensitivity” menu item, you can adjust the transmitter’s input sensitivity to the output signal of the audio source. The adjusted input sensitivity is common for both audio inputs of the transmitter.

The audio level display “AF” always indicates the audio level, even if the transmitter is muted, e.g. allowing you to check the adjusted sensitivity before live operation.

Sensitivity

Mode

Easy Setup

Frequency Preset

Name

Equalizer

Auto Lock

Advanced

Exit

Input sensitivity
is adjusted ...	Effect/display
... too high	Close talking distances, speakers with loud voices or loud music
	passages cause overmodulation in the transmission link.
	The audio level display “AF I” and/or “AF II” shows full deflection for
	the duration of the overmodulation.
... correctly	The audio level display “AF I” and/or “AF II” shows full deflection
	only during the loudest passages.
... too low	The transmission link is undermodulated. This results in a signal with
	high background noise.

Selecting mono or stereo operation – “Mode”

PEAK	PEAK	Menu			PEAK		PEAK	Mode			PEAK		Mode
0	0			0			0			0
-10	-10	Sensitivity				-10	-10					-10
-20	-20	Mode				-20	-20		Stereo			-20		Mono
-30	-30	Easy Setup				-30	-30					-30
-40	-40					-40	-40					-40
AF	AF		Stereo			AF	AF					AF
Call up “Mute Mode”						Select the desired					Store the setting
						setting

“Stored”