Using the transmitter

When carrying out the Sync function, the transmitter’s current frequency bank and channel setting as well as the receiver parameters adjusted via the “Sync Settings” submenu (see page 27) are transferred to the EK 2000 IEM receiver via the infra-red interface.

Carrying out an Easy Setup Sync or a Sync function

The following assumes that you are using the Easy Setup Sync function for setting up a multi- channel system. You can also use the Easy Setup Sync function for establishing a transmission link between one transmitter and one EK 2000 IEM receiver.

Easy Setup Sync

Sync

 

 

￿Switch all transmitters and one receiver ￿ Switch the transmitter and the receiver

on.

on.

 

 

 

 

 

 

￿ On all transmitters, call up the “Easy

￿ Press

the

button  on the

Setup” menu item.

transmitter.

 

The text “Easy Setup Sync” and the

The

icon

appears on the display

icon appear on the display panels of the

panel of the transmitter.

transmitters.

 

 

 

The RF signal of the transmitters is

 

 

 

automatically deactivated.

 

 

 

 

 

 

 

￿ Use your receiver to perform a frequency

–

 

 

preset scan (Scan New List).

 

 

 

￿Select a channel within a frequency bank with a sufficient number of unused channels (Current List).



￿Place the infra-red interface of the ￿ Place the infra-red interface of the

receiver (see the instruction manual of

receiver (see the instruction manual of

the receiver) in front of the infra-red

the receiver) in front of the infra-red

interface  of the first transmitter.

interface  of your transmitter.

16