Using the operating menu
Display | Function of the menu item | Page |
|
|
|
Main menu “Menu” |
| |
|
|
|
Sensitivity | Adjusts the input sensitivity (0 to | |
|
|
|
Mode | Selects mono or stereo operation | |
|
|
|
Easy Setup | Deactivates the RF signal and activates the Easy Setup Sync | |
| function | |
|
| |
|
|
|
Frequency Preset | Sets the frequency bank and the channel | |
|
|
|
Name | Enters a freely selectable name | |
|
|
|
Equalizer | Changes the frequency response of the output signal using a | |
| graphic equalizer (+/– 12 dB in steps of 2.4 dB) | |
|
| |
|
|
|
AutoLock | Activates/deactivates the automatic lock mode | |
|
|
|
Advanced | Calls up the extended menu “Advanced Menu” | |
|
|
|
Exit | Exits the operating menu and returns to the standard display | – |
|
|
|
Extended menu “Advanced Menu” | ||
|
|
|
Tune | Sets the transmission frequencies for the frequency banks | |
| “U1” to “U6” | |
|
| |
|
|
|
| Sets the frequency bank, the channel and the transmission | |
| frequency (frequency banks “U1” to “U6”) | |
|
| |
|
|
|
Sync Settings | Adjusts the receiver parameters and activates/deactivates | |
| their transfer to the receivers | |
|
| |
|
|
|
RF Power | Adjusts the transmission power (Low, Standard or High) | |
|
|
|
Warnings | Calls up “Warnings” (see below) | |
|
|
|
LCD Contrast | Adjusts the contrast of the display panel (adjustable in 16 | |
| steps) | |
|
| |
|
|
|
Reset | Resets the settings made in the operating menu | |
|
|
|
Adjusts the IP address of the transmitter | ||
|
|
|
Software Revision | Displays the current software revision | |
|
|
|
Exit | Exits the extended menu “Advanced Menu” and returns to the | – |
| main menu | |
|
| |
|
|
|
“Warnings” |
|
|
Activates/deactivates warnings (color change and warning messages) |
| |
|
|
|
AF Peak | Audio overmodulation |
|
|
|
|
RF Mute | RF signal is deactivated | |
|
| |
Exit | Exits “Warnings” and returns to the extended menu |
|
| “Advanced Menu” |
|
|
|
|
19