Servis-Rhino CY84 manual Operation

(SGM-3)

OPERATION

•Ensure deflectors and/or chainguards are in position and not damaged. Replace worn, broken, and missing pieces. OPS-R-0038

All Safety Shields, Guards and Safety devices including (but not limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox Shields, PTO integral shields, and Retractable Door Shields should

be used and maintained in good working condition. All safety devices should be inspected carefully at least daily for missing or broken components. Missing, broken, or worn items must be replaced at once to reduce the possibility of injury or death from thrown objects, entanglement, or blade contact.

•Lift-Type - Ensure the tailwheel beam position support bolts are properly intalled and tightened.

•Pull-Type - Ensure that the tailwheel ratchet or hydraulic cylinder is installed and retained correctly to provide the desired cutting height.

•Inspect all bolts and screws and tighten to the recommended torque. OPS-R-0045

CY84 03/08 Operation Section 4-19

© 2008 Alamo Group Inc.

OPERATION