Servis-Rhino CY84 manual Shields, Guards, and Deflectors, Rear Chain Guards Figure Asm-0041

ASSEMBLY

ASSEMBLY

Shields, Guards, and Deflectors

Shields, Guards, and Deflectors are provided for the protection of the operator and bystanders. The Manufacturer strongly recommends the use of Protective Shielding at all times. Do not operate the machine without Shields in place.

Make certain that all Driveline Shields are installed and turn freely and that the tractor PTO shield is replaced before starting the PTO. Attach the other chains on shields to mower and to tractor to prevent shield rotation.

Rubber Fabric Deflectors (Standard Equipment)

Front Deflector (Figure Asm-0040)

1.Attach the front Bracket (1) to the front mower with 4 - 1/2" x 3" Bolts (5), Locknuts (6), and washers (7).

2.Attach the front Deflector to the Bracket with Strap (3), 3/8" x 1-1/2" Bolts (6), and Locknuts

(4).

Rear Chain Guards (Figure Asm-0041)

Attach the Right Guard Mounting Plate (1) & the Left Chain Guard Mounting Plate (2) to the mower with 1/2" x 1-1/2" Bolts (3), Flatwashers (4) and Locknuts (5). Then attach Deflectors (6) and Bar Strap (7) to Mounting Plates with 1/2" x 1-1/2" bolts(8) Flatwashers(9) and Locknuts (10). Fasten Side Rear Chain Guard (11) to Chain Guard Mounting Plates (1&2) with 1/2" x 1-1/4" bolts (12) Flatwashers (13) and Locknuts (14).

CY84 03/08 Assembly Section 3-6

© 2008 Alamo Group Inc.