Servis-Rhino CY84 manual Operation

OPERATION

1.Standard Equipment and Specifications

Horsepower Required (Min.):	CY84
Lift	60 HP
Pull	30 HP
Safety Deflector	Rubber Belting
Cutting Width	84”
Overall Width	90-3/8”
Overall Length:
Lift	125”
Pull	152-1/2”
Cutting Height	2-3/8” - 16-1/2” Min.
Self-Leveling Height Adjustment	Ratchet Jack or Hydraulic Cylinder (Pull)
Jack Stand	Std. (Pull)
Base Unit Weight (Approx.)	1869 lbs.
Hitch	CAT II-III Q.H. or Pull
Blade Carrier	H.D. Pan
Blades	1/2” x 4” Updraft
Gearbox Rating:
540 RPM	150 HP*
1000 RPM	150 HP*
Output Shaft Diameter	2-3/8”
Blade Tip Speed:
540 RPM	16,328 FPM
1000 RPM	15,994 FPM
Cutting Capacity (Max.)	3-1/2”
Driveline Size	Cat 5
Driveline Protection	Slip Clutch
Deck Thickness	3/16”
Side Skirt	1/4” x 10-3/4”
Tires & Wheel:
Lift	Single or Dual, Laminated
Pull	Laminated Foam-Filled Used Airplane,
	Used Airplane,
	Implement, 15” Rim
Safety Tow Chain	Std. (Pull)
*Ratings based on actual field performance.

CY84 03/08 Operation Section 4-3

© 2008 Alamo Group Inc.

OPERATION