ASSEMBLY

14.Attach the outer support weldment to the swath board bracket and the cover frame tube as shown (Figure 11&12).Using two M10 x 75 mm bolts and locknuts on top (O), and one M12 x 50mm bolt (N), and one M12 x 50mm carriage bolt (M).

15.Install the outer tarp support spring to the rear cover frame (P) as shown (Figure 13).

Figure 11

Figure 12

 

Figure 13

DM 07-02

Assembly Section 3-5

© 2004 Alamo Group Inc.

Page 75
Image 75
Servis-Rhino DM112, DM82, DM124, DM95 manual Assembly