Sharp 210T Portuguese Italiano Español Deutsch Français English, Automatic Save, Function, Source

body2.fm Page 9 Monday, September 18, 2000 8:53 AM

Adjusting Your LCD Monitor

No. Name Description

nMoves the selector right or left on the OSD.

7	n Increases or decreases the Brightness.
	n	Increases or decreases the values of the selected
		function.

Automatic Save

Whenever you open the on-screen menu and allow an adjustment window to remain active for about 3 seconds without pressing other buttons, the monitor automatically saves any adjustment you have made. These changes are saved into a user area in the monitor.

The monitor can save adjustments for up to 4 user modes. It has 13 for 210T (15 for 240T ) factory preset or preload modes, one for each signal frequency as listed in table 7 on page 25. If you have made no adjustments, the on-screen menu disappears and the monitor does not save anything.

Function	Description
SOURCE	n Use this button to change a video source

nVideo sources are changed in the following order:

	D-sub DVI RCA	S-VIDEO
	n Video: RCA/S-Video	PC: D-Sub/DVI (Analog/Digital)
PIP	n Use this button to see both PC and Video the same time with either
	PC or Video is in a small window superimposed on PC or Video.

Video	Video	PC
PC	RCA/S-Video	D-sub/DVI
		Video
PC
(D-sub/DVI)		(RCA/S-Video)

*When PBP, Picture-By-Picture, is activated, PIP button performs “Picture Swap.”

PC	Video	Video	PC
D-sub	RCA	RCA	D-sub
DVI	S-Video	S-Video	DVI

English 9

Portuguese Italiano Español Deutsch Français English