Sharp 240T, 210T manual Appendix, PowerSaver

body2.fm Page 20 Monday, September 18, 2000 8:53 AM

Appendix

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain period of time. The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. Power Saver operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature. See Table 2 below for details.

Table 2. Power-saving modes

	Normal	Power-Saving Function mode (EPA/NUTEK)
State
	Operation	Standby Mode	Sleep Mode	Deep Sleep Mode
			Position A1	Position A2
Horizontal Sync	Active	Inactive	Active	Inactive
Vertical Sync	Active	Active	Inactive	Inactive
Video	Active	Blanked	Blanked	Blanked
Power	Green	Amber	Amber Blinking	Amber Blinking
Indicator			(0.5 sec interval)	(1 sec. interval)
Power	210T: 75W(Max.)	Less than 5W	Less than 5W	Less than 5W
Consumption	240T: 80W(Max.)

NOTE: This monitor automatically returns to normal operation when horizontal and vertical sync return. This occurs when you move the computer’s mouse or press a key on the keyboard.

*This monitor is EPA ENERGY STAR® compliant and NUTEK compliant when used with a computer equipped with VESA DPMS functionality.

For energy conservation, turn your monitor OFF when you are not using it or when leaving it unattended for long periods.

NOTE: Maximum power consumption is measured after letting the monitor turned on for 30 minuites that is the time required for the unit to be thermally stable.

English 20