Sharp 240T monitor doing so may create the danger of electric shock, electric socket, Do Not Open

Models: 210T 240T

1 30
Download 30 pages 46 Kb
Page 4
Image 4
monitor; doing so may create the danger of electric shock.
Safety Instructions

Safety.fm Page 2 Monday, September 18, 2000 8:43 AM

1

Before connecting the AC power cord to the DC adapter outlet, make sure the voltage

designation of the DC adapter corresponds to the local electrical supply.

2

Never insert anything metallic into the cabinet openings of the Liquid Crystal Display (LCD)

monitor; doing so may create the danger of electric shock.

3

To avoid electric shock, never touch the inside of the LCD monitor. Only a qualified

technician should open the case of the LCD monitor.

4

Never use your LCD monitor if the power cord has been damaged. Do not allow anything to

rest on the power cord, and keep the cord away from areas where people can trip over it.

5

Be sure to hold the plug, not the cord, when disconnecting the LCD monitor from an

electric socket.

6

Openings in the LCD monitor cabinet are provided for ventilation. To prevent overheating,

these openings should not be blocked or covered. Also, avoid using the LCD monitor on a

bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the LCD monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation.

7

8

Put your LCD monitor in a location with low humidity and a minimum of dust.

Do not expose the LCD monitor to rain or use it near water (in kitchens, near swimming pools, etc.). If the LCD monitor accidentally gets wet, unplug it and contact an authorized dealer immediately. You can clean the LCD monitor with a damp cloth when necessary, but be sure to unplug the LCD monitor first.

9

Place the LCD monitor on a solid surface and treat it carefully. The screen is made of thin

glass with a plastic front surface and can be damaged if dropped, hit or scratched. Do not

clean the front panel with keton-type materials (e.g., acetone), ethyl alcohol, toluene, ethyl acid, methyl, or chloride – these may damage the panel.

10

11

Locate your LCD monitor near an easily accessible AC outlet.

If your LCD monitor does not operate normally – in particular, if there are any unusual sounds or smells coming from it – unplug it immediately and contact an authorized dealer or service center.

12

13

14

High temperature can cause problems. Don’t use your LCD monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat.

Unplug the LCD monitor when it is going to be left unused for an extended period of time.

Unplug your LCD monitor from the AC outlet before any service.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

English 2

Page 4
Image 4
Sharp 240T monitor doing so may create the danger of electric shock, technician should open the case of the LCD monitor