BEFORE USING THE MACHINE
Envelopes
Do not use the following envelopes, as misfeeds will occur.
•Envelopes with metal tabs, clasps, strings, holes, or windows.
•Envelopes with rough fibers, carbon paper, or glossy surfaces.
•Envelopes with two or more flaps.
•Envelopes with tape, film, or paper attached to the flap.
•Envelopes with a fold in the flap.
•Envelopes with glue on the flap to be moistened for sealing.
•Envelopes with labels or stamps.
•Envelopes that are slightly inflated with air.
•Envelopes with glue protruding from the seal area.
•Envelopes with part of the seal area peeled off.
CHANGING A TRAY’S PAPER SIZE SETTING
Follow these steps to change a tray’s paper size setting.
• | The paper size setting cannot be changed when the machine has stopped temporarily due to running out of |
Note | paper or a misfeed, or during interrupt copying. |
•During printing (even in copy mode), the paper size setting cannot be changed.
•Do not load paper that is a different size than the paper size setting. Copying will not be possible.
1 Hold down the [PAPER SIZE ENTER] key for more than 5 seconds to set the selected paper size.
3 Squeeze the lock lever of the front guide and slide the front guide to match the width of the paper, and
GINAL PAPER SIZE 11X17
8½X14
8½X11
8½X5½
8½X11
EXTRA
The currently selected paper feed location indicator will blink and the corresponding paper size (which is currently set) indicator will light steadily. All other indicators will go out.
move the left guide to the appropriate slot as marked on the tray.
Left guide
Front guide
2 Use the [ORIGINAL SIZE ENTER] key to select the paper size.
|
| The indicator of the |
| GINAL PAPER | selected paper size lights |
| SIZE | |
| up. | |
ORIGINAL SIZE | 11X17 | |
ENTER | 8½X14 |
|
8½X11 |
| |
|
| |
| 8½X5½ |
|
| 8½X11 |
|
| EXTRA |
|
•The front guide is a
•The left guide is an
•When using 11" x 17" sized paper store the left guide in the slot at the left front of the paper tray.
16