COPY FUNCTIONS

4 Press the [AUTO IMAGE] key.

 

 

The AUTO IMAGE

AUTO

indicator lights up and the

appropriate ratio for the

IMAGE

 

 

original size and paper

 

 

size is selected. (The

 

 

indicator of the selected

 

 

ratio will light up.)

•

If the ORIGINAL SIZE indicator blinks,

Note

change the orientation of the placed original.

•If the copy is made when a PRESET RATIO selector indicator is blinking, the copied image may run off the page.

5 Set the number of copies and other copy settings, and then press the [START] key ().

The copy will be delivered to the paper output tray.

Note To cancel automatic ratio selection, press the [AUTO IMAGE] key again.

2

MANUAL RATIO SELECTION

Copies can be reduced down to 25% or enlarged up to 400%. The [PRESET RATIO] selector keys ( , ) can be

pressed to quickly select a ratio from among eight preset ratios. In addition, the [Zoom] keys (, ) can be pressed to select the ratio in increments of 1%.

1 Place the original(s) in the document feeder tray or on the document glass.

2 If the original is placed on the document glass, select the original size. (p.18)

3 Use the [PRESET RATIO] selector keys (, ) and [Zoom] keys (, ) to select the desired copy ratio.

When a [Zoom] key ( or ) is pressed, the ZOOM indicator will light up and the zoom ratio will appear in the display for about two seconds.

•

To verify a zoom setting without changing

Note

the zoom ratio, Hold down the [Copy ratio

 

display] key ( ). When the key is

 

released, the display will return to the

 

number of copies display.

• If the copy is made when a PRESET

RATIO selector indicator or the ZOOM

indicator is blinking, the copied image may

 

200%

PRESET RATIO

141

 

129

 

121

 

100%

95

77

64

50%

ZOOM 25400%

Selecting a preset ratio

Press the [PRESET RATIO] selector key () to move up through the preset ratios.

Press the [PRESET RATIO] selector key ( ) to move down through the preset ratios.

Fine adjustment of the ratio

Any ratio from 25% to 400% can be set in increments of 1%.

run off the page. To ensure that the image

fits on the page, lower the copy ratio until

the indicator stops blinking and lights

steadily.

• If the PAPER SIZE indicator is not lit, there

is no appropriate paper. Load appropriate

paper in a paper tray. (p.14)

4 Set the number of copies and other copy settings, and then press the [START] key ().

The copy will be delivered to the paper output tray.

To return the ratio to 100%, press the Note [PRESET RATIO] selector key ( or )

until the 100% indicator lights up.

Press a [PRESET RATIO] selector key ( or ) to set the approximate ratio, then press the [Zoom] keys

( or ) to increase or decrease the ratio.

To decrease or increase the zoom ratio rapidly, hold down the [Zoom] keys ( or ).

23