Sharp AR-5316 SETTINGS FOR AUDITING MODE

SETTINGS FOR AUDITING MODE

AUDITING MODE

When "Auditing mode" is enabled, a count is kept of the number of copies made by each account (up to 20 accounts can be established), and the counts can be displayed and totaled as necessary. In "Auditing mode", the display shows "- - -", and this indicates that a 3-digit account number must be entered in order to use the machine for copying.

The administrator of the machine should complete the following settings:

Note	• Enable "Auditing mode" (p.38)
	• Account number entry (p.38)

AUDITING MODE SETTINGS

Program		Setting codes
	Program name	(factory default settings	Explanation
number
		are indicated in bold)
10	Auditing mode	0: OFF	Use to enable or disable "Auditing mode".
		1: ON	"Auditing mode" is initially disabled.
11	Account number entry	None	Use to set up account numbers. Up to 20
			accounts can be established.
12	Account number	None	Use to change an account number.
	change
13	Account number	0: Delete single account	Use to delete an account number.
	deletion	1: Delete all accounts	A single account number can be deleted, or all
			account numbers at once.
			This displays the number of copies made by
14	Number of copies per	None	each account.
	account		The maximum count is 49,999. If this number is
			exceeded, the count will start over from 0.
		0: Reset single account	Use to reset the copy count of an account to 0.
15	Resetting account		The copy count of a single account or of all
		1: Reset all accounts
			accounts can be reset.

36