If one of the following indicators lights up or one of the following messages appears in the display, check the meaning of the indicator or message in the following table and take appropriate action.
TD cartridge replacement required indicator | Drum cartridge replacement required indicator |
| |||||
| Maintenance |
|
| Display |
| ||
| indicator |
|
|
|
| ||
|
|
|
|
| |||
|
|
|
|
|
| ||
| Paper required indicator | Misfeed indicator |
| ||||
|
|
|
|
|
|
|
|
| Indication |
| Cause and solution | Page | |||
|
|
|
|
|
|
|
|
| Maintenance | Steadily | Service by an authorized SHARP service technician is | – | |||
| indicator | lit | required. | ||||
|
| ||||||
|
|
|
|
|
|
|
|
| TD cartridge | Steadily | Replacement of TD cartridge will be needed soon. Prepare |
| |||
| replacement | lit | a new cartridge. | 53 | |||
|
|
|
|
| |||
| required indicator |
| Blinking | TD cartridge must be replaced. Replace it with a new one. |
| ||
|
|
|
|
|
|
| |
| Drum cartridge | Steadily | Replacement of drum cartridge will be needed soon. |
| |||
| replacement | lit | Prepare a new cartridge. | 54 | |||
|
|
|
|
| |||
| required indicator |
| Blinking | Drum cartridge must be replaced. Replace it with a new one. |
| ||
|
|
|
|
|
|
|
|
| Paper required | Steadily | The tray is out of paper. Load paper. It is also possible that |
| |||
| the tray is not inserted completely into the machine. Make | 14 | |||||
| indicator | lit | |||||
| sure it is inserted correctly. |
| |||||
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| Misfeed indicator | Blinking | A paper misfeed has occurred. Remove the misfeed as | 47 | |||
| explained in "MISFEED REMOVAL". | ||||||
|
|
|
|
| |||
|
|
|
|
|
|
|
|
ORIGINAL SIZE indicator |
| The original is not placed in the correct orientation. Rotate |
| ||||
Blinking | the original so that it is in the same orientation as the | 18,19 | |||||
|
|
|
| blinking ORIGINAL SIZE indicator. |
| ||
|
|
|
|
|
|
|
|
|
|
|
| A blinking PAPER SIZE indicator means that the size of paper |
| ||
|
|
|
| loaded in the tray is different from the paper size setting for the |
| ||
PAPER SIZE indicator | Blinking | tray. Change the paper size setting. | 16 | ||||
To clear the display, do one of the following: | |||||||
•Use the [TRAY SELECT] key (
) to change the tray selection.
•Open and close the tray.
•Press the [CLEAR ALL] key (
).
|
|
|
|
|
| Steadily | The front cover or the side cover is open. Close the front | – |
|
|
|
|
|
| lit | cover or the side cover. | |
|
|
|
|
|
|
| ||
[CH] appears in display |
|
|
| |||||
| TD cartridge is not installed correctly. Reinstall TD cartridge. |
| ||||||
|
|
|
|
|
|
|
| |
|
|
|
|
|
| Blinking | If [CH] still blinks in the display after reinstalling TD | 53 |
|
|
|
|
|
|
| cartridge, contact a SHARP service center. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Turn off the power switch, wait about 10 seconds, and then |
|
| Letters and numbers appear | turn on the switch again. If this does not clear the message, |
| |||||
| write down the code that appears and then unplug the | – | ||||||
| in the display | power cord and contact your SHARP service center. Tell | ||||||
|
| |||||||
|
|
|
|
|
|
| your SHARP service center what code appeared and the |
|
|
|
|
|
|
|
| circumstances under which it appeared. |
|
|
|
|
|
|
|
|
| |
When "Use close paper size" is disabled |
|
| ||||||
| ORIGINAL | PAPER | Press the [TRAY SELECT] key ( ) to manually select the | Online | ||||
| SIZE | SIZE | ||||||
| bypass tray and then press the [ON LINE] key. Printing will | |||||||
| 11X17 | manual | ||||||
| 8½X14 |
|
| begin. | ||||
| 8½X11 |
|
|
|
| |||
|
|
|
|
|
| |||
| 8½X5½ |
|
|
|
| |||
| 8½X11 |
|
| |||||
| EXTRA |
|
| |||||
46