2

Chapter 2

COPY FUNCTIONS

This chapter explains basic copying functions such as normal copying, reduction or enlargement, and exposure adjustment.

NORMAL COPYING

This section explains how to make a regular copy.

If "Auditing mode" has been enabled (p.39), enter your 3-digit account number.

Copying from the document glass

1 Open the document cover/SPF, and place the original.

3 Press the [ORIGINAL SIZE ENTER]

key and select the original size.

 

GINAL PAPER

 

SIZE

ORIGINAL SIZE

11X17

8½X14

ENTER

8½X11

 

8½X5½

 

8½X11

 

EXTRA

Place the original face down on the document glass. Align it with the original size scale.

Note An original up to 11" x 17" can be placed on the document glass.

●Make sure that the PAPER SIZE indicator lights up. If the indicator is not lit, no tray has the same size of paper as the original. Load paper of the required size

in a tray, or select the bypass tray with the [TRAY SELECT] key () and copy from the bypass tray.

●The bypass tray must be manually selected.

●To copy on paper of a different size than the original, select the paper with the [TRAY SELECT] key ().

●If the ORIGINAL SIZE indicator is blinking, rotate the original so that it is in the same orientation as the blinking ORIGINAL SIZE indicator.

2 Close the document cover/SPF.

4 Set the number of copies.

5 Press the [START] key () to begin copying.

START

The copy is delivered to the paper output tray.

•

The paper output tray can hold up to 250

Note

sheets of paper.

•About one minute after copying ends, "Auto clear" activates and restores the copy settings to the initial settings. (p.12) The setting for "Auto clear time" can be changed in the user programs. (p.33)

•Press the [CLEAR] key ( ) to stop copying in the middle of a run.

18