USER SETTINGS
Resetting account
(program No.15)
The copy count of a single account or all accounts can be reset to 0. If no account numbers have been established, the error code "15E" will appear in the display.
[Resetting all accounts]
Press the [1] key and then press the [START] key (
).
The copy counts of all accounts will be deleted.
[Resetting a single account]
1Press the [0] key, and then press the [START] key (
).
2Select the account number to be reset with
the [Copy ratio display] key (
) and then press the [START] key (
).
To reset another account number, enter the Note program number (15) for account number
deletion and then repeat the procedure for "Resetting a single account".
Copying when "Auditing mode" is enabled
When "Auditing mode" is enabled, "- -
1 Enter your
When you enter your account number, "0" appears in the display to indicate that copying is possible.
If you enter an incorrect number, press the
Note | [CLEAR] key ( | ) and then enter the correct |
| ||
| number. |
|
2 | Follow the appropriate steps to make | 4 |
|
the copy.
If you are performing an interrupt copy (p.28), Note be sure to press the [INTERRUPT] key (
)
when finished to exit interrupt mode.
3 When finished, press the [AUDIT CLEAR] key.
AUDIT CLEAR
If a misfeed occurs or the paper runs out Note during copying, your session will not end even
if the [AUDIT CLEAR] key is pressed.
39