| TROUBLESHOOTING |
MISFEED IN THE MACHINE |
|
1 Open the bypass tray and the side | 2 Check the misfeed location. Remove |
cover. | the misfed paper following the |
| instructions for each location in the |
| illustration below. |
If the misfed paper is visible 
here, go to "C. Misfeed in the
transport area".
If paper is misfed here, go to "A.
Misfeed in the paper feed area".
A. Misfeed in the paper feed area
1 Push gently on both ends of the front cover.
If paper is misfed here, go to "B.
Misfeed in the fusing area".
3 Close the front cover and side cover.
The misfeed indicator | 5 | |
( ) will go out. | ||
| ||
|
|
2 Carefully remove the misfed paper. | • | When closing the front cover, gently hold | ||
Note | both ends. | |||
Turn the roller rotating knob in the | • | When closing the side cover, press on the | ||
direction of the arrow to assist in | ||||
| handle. | |||
removing it. |
| • | If the misfeed indicator ( ) does not stop | |
| Be careful not to tear the |
| blinking, check for torn pieces of paper in | |
Roller rotating knob |
| the machine. | ||
misfed paper during |
| |||
|
| |||
removal.
The fusing unit is hot. Do not touch Warning the fusing unit when removing misfed
paper. Doing so may cause a burn or injury.
Do not touch the drum cartridge (green
Caution portion) when removing the misfed paper. Doing so may damage the drum and cause
smudges on copies.
49