TROUBLESHOOTING
C. Misfeed in the transport area
1 Open the fusing paper guide by pressing down the projection on either side of the guide and remove the misfed paper.
Be careful not to tear the misfed paper during removal.
The fusing unit is hot. Do not touch |
| |
Warning the fusing unit when removing misfed |
| |
paper. Doing so may cause a burn or |
| |
injury. |
| |
2 If the misfed paper cannot be removed |
| |
by the previous step but is visible in |
| |
the paper output area, remove the |
| |
paper by pulling it into the paper |
| |
output area. |
| |
Be careful not to tear the |
| |
misfed paper during | 5 | |
removal. | ||
|
3 Close the side cover.
The misfeed indicator (
) will go out.
• When closing the side cover, press on the
Note handle.
•If the paper was torn, make sure that no torn pieces remain in the machine.
•If the misfeed indicator (
) does not stop blinking, check for torn pieces of paper in the machine.
51