Loading Printing Paper
5 Insert the stack of paper firmly into the tray, print side up.•Make sure that the stack is not higher
than the marked line. Loading too much paper may cause paper jams and misfeeds.
• If paper remains in the tray, take it out and combine it into a single stack with the new paper before adding the new paper.
Important:Be sure to load the paper so that printing takes place on the print side of the paper. Printing on the reverse side may result in poor print quality.
6 Make sure the stack of paper is alignedagainst the right paper guide, and then gently move the left paper guide to the 8 1/2 position for letter or legal paper, or the A4 position for A4 paper.
7
8
•Note: If the paper does not feed correctly, remove the entire stack from the tray and repeat the loading procedure from the beginning.
Replace the paper tray cover.•If you loaded other than letter size paper (or you changed the paper size), change the paper size setting as explained on the following page.
20