Maintenance

4 Take a sheet of clean paper and roll it into a tube. Roll it tightly so that the diameter of the holes at each end is less than the thickness of your little finger.

5 Gently wipe the surface of the drumwith the rolled-up paper to remove any particles of toner caked on the drum.

•Do not let the drum surface come into contact with anything other than the rolled-up paper. Fingerprints, water,

alcohol, and other solvents will damage the drum surface.

• Do not touch the drum surface with the edges of the rolled-up paper.

6 Replace the drum cartridge, holdingthe tabs on the drum cartridge handle with both hands.

• To insert the cartridge, align the guides on the cartridge with the runners on the sides of the compartment.

7 Replace the toner cartridge and close the print compartment cover (see page 15).

96