Broadcasting (Sending a Fax to Multiple Destinations)
4 Repeat Steps 2 and 3 for each of the other destinations to which you wish to send the fax (maximum of 20).
•To check your selected destinations, press to scroll through them. To
STOP
delete a destination, scroll to the destination and then press .
6 When you are ready to begin transmission, press START .•A Transaction Report is automatically printed out after Broadcasting is completed. Check the "Note" column of the report to see if any of the destinations are marked "Busy" or have a communication error code. If so, send the document to those destinations again.
Broadcasting using a Group Key
If the fax machines to which you want to broadcast have all been programmed into one Group Key (see Storing numbers in Group Keys which follows), you can perform the broadcasting operation using the following simplified procedure:
1 | Load the document(s). |
|
| |
|
| RESOLUTION/ |
|
|
| • | RECEPTION MODE |
|
|
| If desired, press | to set the |
| |
|
| resolution and/or contrast. |
| |
|
|
|
| READY TO SEND |
2 | Press the appropriate Group Key. | 09/G1 |
54